Hunan MTR Co., Ltd.
Hunan MTR Co., Ltd.
Add to Cart
Corrosion Resistant 20m Length Soft Carbon Fiber Felt 0.12 N/Mm2
Soft Felt - Standard Carbon Felt
Specification:
Length (m) ≤ 20m
Width (m) ≤ 1.4m
Thickness (mm) 3-18mm
Warp direction: 8 ~ 14
Weft direction: 10 ~ 16
Thermal conductivity: < 0.08 w / m.k
Ash content: 0.765%
Features:
The adsorption capacity of COD, BOD and oil in aqueous solution is much higher than GAC. The adsorption resistance is small, the speed is fast, and the absorption is rapid and thorough.
Technical index:
| Thermal Conductivity(W/m·k) | 0.05-0.16 |
| Carbon content(%) | 90-95 |
| Ash content(%) | ≤0.76 |
| Specific heat(KJ/Kg·K) | 1.52-1.73 |
| Test weight(g/cm3) | 0.15-0.17 |
| Tensile strength | Vertical:(N/mm2)≥0.12 Horizontal:(N/mm2)≥0.10 |
| Specific resistance(Ω·mm2/m) | Horizontal:8.2×103—11.1×103 Vertical:11.8×103—16.8×103 |
Production method:
The manufacturing methods are: (1) needle punching after air-laid short carbon fiber; (2) carbonization of pre-oxygen silk felt; (3) pre-oxidation and carbonization of polyacrylonitrile fiber felt. It used as insulation material for vacuum furnace and inert gas furnace, hot gas or liquid, and molten metal filter material, fuel cell porous electrode, catalyst carrier, composite material lining, and composite material of corrosion-resistant contain
Application :
1. Soft Felt can be used as a flame retardant material in the insulation industry;
2. As a porous material, it can be used as a catalyst carrier for the chemical industry;
3. Soft Felt can be used as a corrosion-resistant material for the lining or external protective layer of composite materials.
4. Soft Felt can be widely used as a conductive, absorbing and absorbing material in aviation, batteries, electrodes (such as electrode tubes, electrode sticks, etc.); at present, applications related to conductive concrete are also developing rapidly.
