Hunan MTR Co., Ltd.
Hunan MTR Co., Ltd.
Add to Cart
Conventional Composite Hard Felt - Sheet
Hard carbon fiber felt is a new type of thermal insulation material compounded by special process. It Suitable for Vacuum sintering furnace. (Carbide sintering furnace, Quenching furnace, Carburizing furnace, Pressurized gas quenching furnace, Metallurgical powder sintering furnace, Medium frequency induction furnace, Brazing furnace, Ceramic sintering furnace)
Advantages: strong anti-radiation ability, long service life, energy saving, No pollution in hot cell, pressure resistance, resistance to airflow impact, good thermal insulation effect, Its life span is 3 times that of soft felt.
Application:
Physical and chemical indicators:
| main material | PAN-CF / asphalt-CF / viscose-CF | Sheet specifications | length(mm) | 10-3000 |
| Bulk density(g/CM3)) | 0.28-0.32 | width(mm) | 10-2000 | |
| Thermal conductivity |
0.15-0.25(25℃)0.40-0.45(1400℃)
|
thickness(mm) | 5-300 | |
|
Barrel specifications |
diameter(Φ) | Φ100-Φ2500 | ||
| Carbon content(％) | ≧96.5 | Wall thickness(T) | 5-150 | |
| bending strength(Gpa) | 1.8-3.0 | Tube height | 100-3000 | |
| Flexural strength(Gpa) | 1.2-2.5 |
Use environment |
air(℃) | ≦350 |
| ash content(ppm) | ≦300 | vacuum(℃) | ≦1800 | |
| Processing temperature | ≧1600 | Inert atmosphere(℃) | ≦2650 |
Characteristic:Polyacrylonitrile-based carbon felt is a kind of 3-16mm thick felt made of polyacrylonitrile-based original felt after thermal stabilization and carbonization treatment. Since 90% of carbon felt is pores, it has excellent thermal insulation performance in vacuum or inert atmosphere,especially under high temperature conditions, it has the characteristics of light weight, small specific heat capacity, soft texture, good thermal insulation, easy operation, etc. It has stable performance and is especially suitable for intermittent operation of high-temperature vacuum furnace, which can save a lot of energy.